User Manual

MMMMMMMMMA M
180
135
105857050
35
28
24
18
【ZOOM】settings
Press ‘ZOOM button’ to display flicking. The flash will default to A
(Automatically zooms with the lens). To manually change to a different focal
length, press the Right Button to go to Manual, them continue pressing until
you reach the desired setting. Use the Left Button to decrease the focal length
and keep pressing until it goes back to A. Press "ZOOM button" to exit setup.
Automatic
About Automatic Zoom A and Manual Zoom M Settings:
Flash head Automatically zoom: If the unit does
not default to "A" , continue to press the Left Button
until "A" is displayed and the flash will now
Automatically adjust the flash coverage with the
focal length of the lens up to 180mm when mounted
to cameras which support E -TTL and i-TTL
systems.
Manually set the lamp holder zoom position:
Press the Right Button when the "M" is displayed,
and then you can manually adjust the flash
coverage (18, 24, 28, 35, 50, 70, 85, 105, 135 or
180mm).
·
When using manual zoom, please make sure that flash coverage equals
the lens zoom setting, so that the picture will not appear the edge of the
shadow.
19 20
Wireless command flash mode
Wireless flash system is composed by Multiple Wireless flash;You can
create a wide variety of lighting effects like using ordinary TTL flash.
Wireless command flash mode has SLAVE mode.
SLAVE flash mode.
SLAVE flash mode can be divided into:
Wireless SLAVE flash mode (E-TTL SLAVE c Canon)
Command SLAVE flash mode (i-TTL SLAVE n Nikon)
SLAVE
c
SLAVE n
SLAVE flash model
SLAVE flash model can be divided into:
Wireless instruction model (SLAVE c/SLAVE n )
Wireless optical flash model
Long press 【Flash model select button】 3 seconds ,flash light will shift
between flash model(TTL/M/Multi) and SLAVE flash model (E-TTL
SLAVE c /i-TTL SLAVE n ).
Long press 【Flash model select button】
3 seconds shift into wireless flash model.
Under Wireless flash model:Short press 【Flash model select button】
flash light shift between E-TTL SLAVE c model ,i-TTL SLAVE n model ,
M S1 model and M S2 model.
UnderSLAVE model :Long press 【Flash model select button】,it can
shift into flash mode (Salve C /SLAVE c /S1/S2 as off camera SLAVE
unit to build different light.
Under normal
flash model :