Datasheet

ManualsBrandsSunon ManualsAxial FansAxial Fan AC 92x92x25mm 61m³/h

SUNON

CUSTOMER :

DESCRIPTION : AXIAL AC FAN

DIMENSIONS : 92X92X25 mm

M O D E L : SF23092A

P/N : 2092HST.GN

SUNON SPEC. NO. : A09000470G-00

CUSTOMER

APPROVAL NO.

APPROVED BY

CUSTOMER

(AUTHORIZED)

SPEC.NO

A09000470G-00

ISSUE DATE 04. 30. 2005

EDITION 3

REVISION DATE

06. 03. 2013

DRAWN

Jeff

06/03

CHECKED

March

Kiddy

APPROVED

Jacky

E.SPEC EA92011

建準電機工業股份有限公司

SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD.

No. 30, LN. 296, XINYA RD., QIANZHEN DIST., TEL:886-7-8135888

KAOHSIUNG CITY 80673, TAIWAN (R.O.C)

FAX:886-7-8230505/8230606/8231010

URL:http://www.sunon.com

E-mail: sunon@email.sunon.com.tw

SPECIFICATION FOR APPROVAL

2013.07.15

D.C.C.

Summary of content (9 pages)

PAGE 1
SUNON SPECIFICATION FOR APPROVAL CUSTOMER : DESCRIPTION : AXIAL AC FAN DIMENSIONS : 92X92X25 mm MODEL : SF23092A P/N : 2092HST.GN SUNON SPEC. NO. : A09000470G-00 CUSTOMER APPROVAL NO. APPROVED BY CUSTOMER : : (AUTHORIZED) DRAWN Jeff 06/03 CHECKED March Kiddy APPROVED Jacky SPEC.NO A09000470G-00 ISSUE DATE 04. 30. 2005 EDITION 3 REVISION DATE 06. 03. 2013 E.SPEC EA92011 建準電機工業股份有限公司 SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. No. 30, LN. 296, XINYA RD., QIANZHEN DIST.
PAGE 2
SUNON AXIAL AC FAN MODEL : SF23092A P/N : 2092HST.GN CHARACTERISTICS 1. Motor Design : Reliable Shaded-Pole Motor Construction. 2. Insulation Resistance : 500 Megohms minimum at 500 VDC. 3. Dielectric Strength : 1500 VAC for one second. 4. Motor Protection : Impedance protected. 5. Noise Level : Measured in a semi-anechoic chamber with background noise level below 15 dB(A). The fan is running in free air with the microphone at a distance of one meter from the fan intake. 6.
PAGE 3
SUNON SPECIFICATIONS MODEL : SF23092A P/N : 2092HST.GN 1-1. Rated Voltage : 220-240 VAC 50/60 Hz 1-2. Operating Voltage Range : 185~245 VAC 1-3. Starting Voltage : 185 VAC (25 deg. C POWER ON/OFF) 1-4. Rated Speed : 2250/2750 RPM ± 10% 1-5. Air Delivery : 29/36 CFM 1-6. Static Pressure : 0.12/0.18 Inch-H2O 1-7. Rated Current : 0.07/0.06 AMP 1-8. Rated Power : 14.5/14 WATTS 1-9. Noise Level : 36/39 dB(A) 1-10. Direction of Rotation : Counter-clockwise viewed from front of fan blade 1-11.
PAGE 4
SUNON MODEL : SF23092A P/N : 2092HST.GN PERFORMANCE CURVES STATIC PRESSURE mm-H2O Inch-H2O 6 0.20 50 Hz 4 60 Hz 0.10 2 0 CFM 0 0 25 50 0.71 1.42 m3/min SPEC.NO A09000470G-00 REVISION DATE 06. 03. 2013 建準電機工業股份有限公司 ISSUE DATE 04. 30. 2005 E D I T I O N 3 SUNONWEALTH ELECTRIC D.C.C. MACHINE INDUSTRY CO., LTD. P A G E 4 OF 9 2013.07.
PAGE 5
SUNON MATERIAL 2. Material 2-1. Frame : DIE-CAST ALUMINUM 2-2. Impeller : Thermoplastic PBT of UL 94V-0 DIMENSIONS Air Flow Direction: Toward label side. UNITS:mm SPEC.NO A09000470G-00 REVISION DATE 06. 03. 2013 建準電機工業股份有限公司 ISSUE DATE 04. 30. 2005 E D I T I O N 3 SUNONWEALTH ELECTRIC D.C.C. MACHINE INDUSTRY CO., LTD. P A G E 5 OF 9 2013.07.
PAGE 6
SUNON Notes Ⅰ.SAFETY 1. DO NOT use or operate this fan in excess of the limitations set forth in this specification. SUNON is not responsible for the non-performance of this fan and/or any damages resulting from its use, if it is not used or operated in accordance with the specifications. 2. SUNON recommends adding a protection circuit to the product or application in which this fan is installed, such as a thermo-fuse, or current-fuse or thermoprotector.
PAGE 7
SUNON Notes II. SPECIFICATION MODIFICATION 1. SUNON offers engineering assistance on fan installation and cooling system design. 2. All changes, modifications and/or revisions to the specifications, if any, are incorporated in the attached specifications. 3. No changes, modifications and/or revisions to these specifications are effective absent agreement, by both SUNON and the customer, in writing. 4.
PAGE 8
SUNON Notes 5. This fan must be installed properly and securely. Improper mounting may cause harsh resonance, vibration, and noise. 6. Fan guards may prevent injury during handling or installation of the fan and are available for sale with this fan. 7. Unless otherwise noted, all testing of this fan is conducted at 25°C ambient temperature and sixty-five percent (65%) relative humidity. 8. DO NOT store this fan in an environment with high humidity.
PAGE 9
SUNON Declaration of RoHS Control declaration of environment- related substances/ materials 1. In accordance with the Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU, SUNON product have complied with law and discipline not to employ the forbidden substances, and restrict the allowable concentration of some limited substances deliberately in our components.