Datasheet

ManualsBrandsSunon ManualsAxial FansAxial Fan DC 60x60x38mm 24V 70.5m³/h

SUNON

SPECIFICATION FOR APPROVAL

CUSTOMER :

DESCRIPTION : DC BRUSHLESS FAN

DIMENSIONS : 60X60X38 mm

M O D E L : PMD2406PMB3-A

P/N : (2).GN

SUNON SPEC. NO. : D06027650G-00

CUSTOMER

APPROVAL NO.

APPROVED BY

CUSTOMER

(AUTHORIZED)

SPEC.NO D06027650G-00

ISSUE DATE 06.01.2005

EDITION 2

REVISION DATE

06.29.2013

DRAWN

Rita

6/29

CHECKED

Kiddy

March

APPROVED

Jacky

E.SPEC EN60031

建準電機工業股份有限公司

建準電機工業股份有限公司建準電機工業股份有限公司

建準電機工業股份有限公司

SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD.

NO. 30, LN. 296, XINYA RD., QIANZHEN DIST., TEL:886-7-8135888

KAOHSIUNG CITY 80673, TAIWAN (R.O.C)

FAX:886-7-8230505/8230606/8231010

URL:http://www.sunon.com

E-mail: sunon@email.sunon.com.tw

2013.07.15

D.C.C.

Summary of content (9 pages)

PAGE 1
SUNON SPECIFICATION FOR APPROVAL CUSTOMER : DESCRIPTION : DC BRUSHLESS FAN DIMENSIONS : 60X60X38 mm MODEL : PMD2406PMB3-A P/N : (2).GN SUNON SPEC. NO. : CUSTOMER : APPROVAL NO. APPROVED BY : CUSTOMER D06027650G-00 (AUTHORIZED) DRAWN Rita 6/29 CHECKED Kiddy March APPROVED Jacky SPEC.NO D06027650G-00 ISSUE DATE 06.01.2005 EDITION 2 REVISION DATE 06.29.2013 E.SPEC EN60031 建準電機工業股份有限公司 SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. NO. 30, LN. 296, XINYA RD., QIANZHEN DIST.
PAGE 2
SUNON DC BRUSHLESS FAN MODEL : PMD2406PMB3-A P/N : (2).GN CHARACTERISTICS 1. Motor Design : DC brushless 4 pole motor design. 2. Insulation Resistance : More than 10M ohm between internal stator and lead wire(+) measured at DC 500V. 3. Dielectric Strength : Applied AC 500V for one minute or AC 600V for 2 seconds between housing and lead wire(+) 4. Noise Level : Measured in a semi-anechoic chamber with background noise level below 15 dB(A).
PAGE 3
SUNON SPECIFICATIONS MODEL: PMD2406PMB3-A P/N : (2).GN 1-1. Rated Voltage : 24 VDC 1-2. Operating Voltage Range : 10~27.6 VDC 1-3. Starting Voltage : 10 VDC (25 deg. C POWER ON/OFF) 1-4. Rated Speed : 6000 RPM ± 10% 1-5. Air Delivery : 41.5 CFM 1-6. Static Pressure : 0.53 Inch-H2O 1-7. Rated Current : 0.22 AMP 1-8. Rated Power : 5.3 WATTS 1-9. Noise Level : 47 dB(A) 1-10. Direction of Rotation : Counter-clockwise viewed from front of fan blade 1-11.
PAGE 4
SUNON MODEL : PMD2406PMB3-A P/N : (2).GN PERFORMANCE CURVES STATIC PRESSURE mm-H2O Inch-H2O 24 0.80 24 VDC 16 0.40 8 0 CFM 0 0 25 50 0.71 1.42 m3/min SPEC.NO D06027650G-00 REVISION DATE 06.29.2013 建準電機工業股份有限公司 ISSUE DATE 06. 01. 2005 E D I T I O N 2 SUNONWEALTH ELECTRIC D.C.C. MACHINE INDUSTRY CO., LTD. P A G E 4 OF 9 2013.07.
PAGE 5
SUNON MATERIAL 2-1. Frame : Thermoplastic PBT of UL 94V-0 2-2. Impeller : Thermoplastic PBT of UL 94V-0 2-3. Bobbin : Thermoplastic PBT of UL 94V-0 2-4. Lead Wire : UL1007,24 awg,+RED,-BLACK DIMENSIONS 1. Air Flow Direction: Toward label side. 2. Best Mounting Direction: Any orientation. ：mm UNITS： SPEC.NO D06027650G-00 REVISION DATE 06.29.2013 建準電機工業股份有限公司 ISSUE DATE 06. 01. 2005 E D I T I O N 2 SUNONWEALTH ELECTRIC D.C.C. MACHINE INDUSTRY CO., LTD. P A G E 5 OF 9 2013.07.
PAGE 6
SUNON Notes Ⅰ.SAFETY 1. DO NOT use or operate this fan in excess of the limitations set forth in this specification. SUNON is not responsible for the non-performance of this fan and/or any damages resulting from its use, if it is not used or operated in accordance with the specifications. 2. SUNON recommends adding a protection circuit to the product or application in which this fan is installed, such as a thermo-fuse, or currentfuse or thermo-protector.
PAGE 7
SUNON Notes II. SPECIFICATION MODIFICATION 1. SUNON offers engineering assistance on fan installation and cooling system design. 2. All changes, modifications and/or revisions to the specifications, if any, are incorporated in the attached specifications. 3. No changes, modifications and/or revisions to these specifications are effective absent agreement, by both SUNON and the customer, in writing. 4.
PAGE 8
SUNON Notes 5. This fan must be installed properly and securely. Improper mounting may cause harsh resonance, vibration, and noise. 6. Fan guards may prevent injury during handling or installation of the fan and are available for sale with this fan. 7. Unless otherwise noted, all testing of this fan is conducted at 25°C ambient temperature and sixty-five percent (65%) relative humidity. 8. DO NOT store this fan in an environment with high humidity.
PAGE 9
SUNON Declaration of RoHS Control declaration of environment- related substances/ materials 1. In accordance with the Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU, SUNON product P/N: GN models have complied with law and discipline not to employ the forbidden substances, and restrict the allowable concentration of some limited substances deliberately in our components.