Datasheet

建
建建
建 準
準準
準 電
電電
電 機
機機
機
SUNONWEALTH
Page 4 of 14
3. PERFORMANCE CHARACTERISTIC
RATED SPEED
3200 RPM ± 10% at rated voltage
AIR FLOW
41 CFM
STATIC PRESSURE
0.18 Inch-H
2
O
ACOUSTIC NOISE
33 dB(A)
AIR FLOW V.S. PRESSURE See Page 5
INSULATION CLASS UL Class A
INSULATION RESISTANCE
PLASTIC HOUSING
10M ohm at 500 VDC between internal stator and
lead wire (+)
DIELECTRIC STRENGTH Applied AC 500 V for one minute or AC 600 V for 2
Seconds between housing and lead wire (+)
LIFE EXPECTANCY 70,000 Hours at 40 deg. C, 65% humidity, 90% CL.


Automatic Restart
Note: In a situation where the fan is locked by an external
force while the electricity is on, an increase in coil
temperature will be prevented by temporarily turning off the
electrical power to the motor. The fan will automatically
restart when the locked rotor condition is released.
PROTECTION


Polarity Protection
IP Class : IP55
According to IEC 529 (or IEC 34-5) IP standard, the
average temperature is 23~24°C and hu
midity is 67% RH
for Dust Water Test. The fan needs to be test and Spray
Put in dust box for 8 hours for Dust Test and be sprayed
10 minutes with water of 4 aspects for Spray Water Test.
After these 2 tests, which executing by regular standard,
the fan will be measured the performance is normal or
not.
PS. There are different applicative environments and
systems by different customers, so please put the
product in the most suitable environment to measure
the performances.
4. SAFETY
SAFETY UL CUR TUV
NO. E77551 E77551



2011.06.01