Technical Specifications

Sunnyside Corporation 6/2010
DESCRIPTION PRODUCT IMAGE SAFETY INFORMATION
1
1
0
ITEM NUMERS & SIZES
Pint Quart 1-Gallon 2.5-Gal. 5-Gal. 55-Gal.
87316 87332 873G1 873G5 87355
HAZARDOUS INGREDIENTS PRODUCT APPLICATION
Ingredient CAS# Percent
No Hazardous Ingredients by OSHA Definition.
PHYSICAL PROPERTIES TEST METHOD
Typical Properties Results ASTM Applied
GRAVITY, (60 ˚F)
API D-278
SPECIFIC 0.934 D-1298 n
DENSITY (Lb./GAL) 7.78 n
DISTILLATION RANGE
E,° F. ≥300-IBP D-86 n
FREEZING POINT, ˚F (˚C)
KAURI BUTANOL (Kb) VALUE D-1133
ANILINE POINT, ˚F D-611
FLASH POINT, T.C.C. ˚F ≥200 D-56 n
FLAMMABLE LIMITS IN AIR, % BY VOLUME
LOWER, AT 100˚F (38˚C)
UPPER, AT 200˚F (93˚C)
AUTOIGNITION TEMPERATURE, ˚F (˚C) D-1255
COLOR, SAYBOLT D-156
DOCTOR TEST D-484
CORROSION, 3 HRS. @ 212 ˚F D-130
NON-VOLATILES, g/100ml D-1353
ACIDITY D-847
ALKALINITY (AS NH3, WT%) D-1614
EVAPORATION RATE Slower than ether
APPEARANCE Clear, Amber color
ODOR Mild Odor D-1296 n
VAPOR PRESSURE, mm Hg @ 20 ˚C
REFRACTIVE INDEX, @ 20 ˚C D-1218
SULFUR CONTENT, PPM D-1266
PURITY, by G.C., Wt%
WATER CONTENT, Wt% D-1364
WATER MISCIBILITY Negligible D-1722
DOT SHIPPING NAME
Not Regulated by US DOT as a Hazardous Material
DOT CLASSIFICATION
SHIPPING Wt. at 20 ˚C 7.78
V.O.C. (g/L) 0-Non Volatile
SUNNYSIDE RAW LINSEED OIL
TECHNICAL DATA SHEET
873
RAW LINSEED OIL
REACTIVITY:
Raw Linseed Oil should be applied to unfinished wood only. Linseed oil must
penetrate to be effective. Thin up to 2:1 with mineral spirits to ensure proper
penetration. Raw linseed oil can be added directly to oil based paints and
stains, always follow coating manufacturer's directions.
Raw Linseed Oil is extracted from the seed of the flax plant. It is an extender
and fortifier of oil based paints, stains and primers, and is a quality finish for
fine woods, furniture and antiques. Raw linseed oil is the product of choice
when an all natural product is required.
See MSDS sheeet for additional Health, Safety, Handling and Regulatory
Information available on our website at
www.sunnysidecorp.com/msds.html
These properties are repesentative of typical inspections. They do not
constitute product specifications. Consult MSDS sheet for additional
information.
HEALTH:
FIRE:
Page 1 of 1