SDS

______________________________________________________________________________________________________________
Revision Date: 3-10-2015
Boiled Linseed Oil - 872
Exposure Limits
As an airborne mist containing vegetable oil, exposure limits pertaining to "vegetable oil mist" have been provided below
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
9. PHYSICAL AND CHEMICAL PROPERTIES
Engineering Measures
Ensure adequate ventilation, especially in confined areas. Apply technical measures to
comply with the occupational exposure limits. However it is the duty of the user to verify this
and follow given exposure limits at the workplace. Ensure that eyewash stations and safety
showers are close to the workstation location.
Chemical Name ACGIH TLV
General Hygiene Considerations
Handle in accordance with good industrial hygiene and safety practice.
OSHA PEL MEXICO NIOSH
Personal Protective Equipment
Linseed oil, cobalt
manganese salt
Eye/face Protection.
If exposed to airborne mist, or if splashing is possible, appropriate safety glasses with
side-shields or safety goggles are recommended.
Ceiling: 5 mg/m
3
Mn
Skin and Body Protection
Oil resistant gloves are recommended. Appropriate body protection should be selected
based on activity and possible exposure. Also take into consideration the specific local
conditions under which the product is used.
IDLH: 500 mg/m
3
STEL: 3 mg/m
3
Mn
TWA: 1 mg/m
3
Mn
Respiratory Protection
In case of mist, spray or aerosol exposure wear suitable personal respiratory protection.
vegetable oil mist TVL: 10 mg/m(3) TWA: 5 mg/m
3
mist,
respirable fraction
TWA: 15 mg/m
3
mist, total
TWA: 10 mg/m
3
except
irritant oils
TWA: 10 mg/m
3
total mist
TWA: 5 mg/m
3
respirable
mist
Not applicable
Storage
Keep in a cool sheltered place. To maintain product quality, do not store in heat or direct sunlight.
Environmental Precautions
Prevent further leakage or spillage if safe to do so. Do not allow product to reach soil, sewage system or any water course.
Physical State
Liquid
7. HANDLING AND STORAGE
Personal Precautions
Use personal protective equipment. Remove all sources of ignition. Avoid high pressure washing or generation of aerosols.
Material can create slippery conditions.
Flash Point
> 99 °C / 210 °F
Odor
Characteristic
Methods for Clean-up
Dam up. Soak up with inert absorbent material. Use dry spill kit material or sand, collect in appropriate containers. For disposal
information see section 13. Clean contaminated surface thoroughly.
______________________________________________________________________________________________________________
Handling
Ensure adequate ventilation. Do not use pressure to empty drums. Keep away from open flames, hot surfaces and sources of
ignition.
Odor Threshold
Not applicable
Appearance
Clear Amber
Page 3 / 7
6. ACCIDENTAL RELEASE MEASURES
North America (OSHA/GHS and WHMIS Compliant)
Other Information
Oil soaked materials may spontaneously combust
pH