Instructions / Assembly
Page 1 / 1 WXF04808
NOTE:
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS CAUSED BY THE USE OF PROTECTIVE COATINGS.
• Do not install on uneven surfaces as this could cause it to tip over.
• Do not use harsh chemicals, abrasive materials, or a pressure washer to clean this unit.
• During freezing weather, empty the birdbath and store it indoors; allowing ice to form in the bowl may cause it to crack or break.
SAFETY STATEMENTS & WARNINGS
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
BROODING FROG POLYRESIN BIRD BATH
Read the assembly instructions carefully and follow the care instructions. Keep this manual for future reference.
WARNING:
ASSEMBLY
1. Align Bowl (A) with Pedestal (B) and twist the bowl to lock
the parts together.
2. Fill the bowl with clean water, approximately 1/2 gallon.
Avoid heavily chlorinated water as it may damage the nish.
CHOOSING A LOCATION
Select a smooth, level surface to place the bird bath.
A large stepping stone or paving stone (not included) is
recommended to help ensure the bird bath remains evenly
balanced.
CLEANING
Cleaning the birdbath 1-2 times per week is recommended.
D
1. Empty the old water.
2. Wash the bowl with clean water and a soft cloth.
3. Thoroughly rinse the bowl with clean water, never use a
high-pressure sprayer as doing so may damage the nish.
A Bowl 1
B Pedestal 1
Ensure all parts are
accounted for before
disposing of packaging.
A
B
11/2022