Instructions / Assembly

D
F
MM
REGULATOR
BLACK COUPLING NUT
turn clockwise to connect
CYLINDER VALVE
PRESSURE
RELIEF VALVE
BLEED-OFF
VALVE
turn clockwise
to close
HANDWHEEL
Page 9 / 15PH02
Place a 20 lb propane gas cylinder (not included) in
the center of the base and secure it with the Webbing
(MM).
11 Install gas cylinder (not included)
Turn the handwheel on the propane cylinder valve
clockwise to ensure it is closed.
Attach the regulator to the cylinder valve by turning
the regulator coupling nut clockwise. Make sure it is
fastened securely ─ tighten connections by hand only.
12 Attach regulator to cylinder valve
Unscrew the four screws that are preassembled on
Post Support (F). Then, attach Post (D) to the Post
Support (F) using those four screws.
10 Attach post to post support
08/2021