Instructions / Assembly
I
BB
H
AA
EE
BB
AA
II
JJ
G
CC
H
Page 6 / 15
Align the mounting holes on the Wheel Assembly (I)
with the mounting holes on the Base (H).
Attach the wheel assembly to the base using two
M6x12mm Bolts (AA) and two M6 Nuts (BB).
Mount three Anchoring Brackets (II) to the base
using six M6x12mm Bolts (AA) and six M6
Nuts (BB).
After assembly is complete, use three Anchors (JJ) to
ax the heater to the ground.
Attach three Support Legs (G) to the top of the base
using three M8x16mm Bolts (CC).
1
2
(optional)
3 Attach support legs to base
PH02
Assembly
08/2021