Instructions / Assembly
Page 13 / 15PH02 08/2021
Maintenance
FLAME CHARACTERISTICS
• The flame pattern at the burner mesh should be visually checked
whenever the heater is operated.
• Normally, the burner flame is blue with a yellow flame at the top. The
burner mesh will become red hot.
• Turn the heater off immediately if flames extend beyond the surface of the burner mesh, or there is the
phenomenon of flame lift or light back, or a black spot is accumulating on the burner mesh or reflector. The
heater should not be operated again until the unit is serviced or repaired.
BASIC USE & CARE
• Always disconnect the propane gas tank before performing any maintenance.
• Keep the heater at a safe distance from combustible materials.
• Visually inspect burner for obstructions and keep tank enclosure free and clear from debris. Use a soft brush to
remove mild stains, loose dirt, and soil after the burner is completely cooled down. Wipe down with a soft cloth.
• Harsh weather conditions may cause stubborn stains, discoloration, and possibly rust pitting.
• Permanent damage may occur if powder or solvent cleaners come in contact with painted and plastic components
on this heating unit.
• Keep the heating unit stored away from direct sunlight.
• If storing this unit inside, disconnect the propane gas tank from the gas valve.
• Not using manufacturer-supplied or approved parts/accessories may result in a defective condition and void the
warranty of this heating unit.
• Always place the protective cover on the heater when not in use.
• Regularly checked and tightened all screws and bolts.
STORAGE
• Do not leave the heater exposed to outside weather conditions or store it in damp, moist conditions.
• Use the included cover to protect the heater from weather elements as well as dust/debris build-up.
• Wait until the heater has had ample time to completely cool before moving or covering.
Do not touch hot surfaces
for hours after the unit has been extinguished. If the unit still feels hot, wait until it is completely cooled.
• To save space during long-term storage, the reflector can be removed. Take care to ensure the shape of the
reflector is not damaged or deformed, as this will affect heater performance.
• If the reflector was detached for storage, reattach it before using the heater again. Never operate the heater
without the reflector in place.
• When stored indoors, the propane gas cylinder must be disconnected and stored away from the heater.
• Store propane tank(s) in accordance with local laws and regulations.
• Do not let children tamper with the heater or the propane gas cylinder.
SERVICE
• We recommend this appliance be serviced annually or after every 100 hours of use, whichever happens first.
• A qualified technician must carry out all servicing work.
• If your heater needs maintenance or is not working properly, please get in touch with your local authorized agent
for replacement parts and/or servicing.
Yellow Tip
Primary Blue Flame