Instructions / Assembly
Page 11 / 15PH02 08/2021
INSPECT
This outdoor patio heater must be inspected regularly to ensure that the product is safe to use and to extend
its life.
WARNING:
1. Check the burner to make sure it is securely in place and that there is no excessive damage or wear.
2. Check the head assembly to make sure it is clear and free of insects, spider nests, and other debris.
3. Check all gas connections for leaks.
4. Check components for any signs of damage, rust or excessive wear.
5. Inspect the hose assembly for evidence of excessive abrasion, cuts or wear. If the hose is damaged, it must
be replaced before the heater can be used.
6. If damage to any component is detected, DO NOT operate until the proper repairs have been made.
WARNING:
WARNING:
airborne combustibles or products such as gasoline, solvents, paint thinner, dust
GAS AND REGULATOR
• The gas hose must be connected in accordance with these instructions. When installed correctly, all parts
of the hose should be contained within the patio heater pole and gas cylinder chamber. No part of the hose
should be outside of the patio heater body where it could be a trip hazard or accidentally damaged.
• This appliance is equipped for propane use only.
• Refer to the instructions supplied for correct use and attachment of the regulator.
• Never store a propane cylinder on its side.
• Never store propane cylinders indoors.
• The supplied propane regulator must only be used with a propane gas cylinder.
• NEVER use an adjustable regulator with this appliance.
• Consult your gas dealer for the most suitable propane cylinder for your regulator.
NOTICE