Instructions / Assembly

BMB101 08/2023 Page 2 / 3
ASSEMBLY
STEP 1
A: 1
B: 2
1: 4
STEP 2
C: 1
2: 2
3: 2
• Lay Seat (A) face-
down on a soft, clean
surface.
• Align Side Panels
(B) with the side of
the seat panel and
loosely secure by
hand tightening two
M6x35mm Bolts (1).
• Repeat the previous
step to loosely fasten
one more side panel
to the opposite side
of the seat.
• Flip the unit upright.
• Align Stretcher (C)
with the side panels
and loosely secure
using two M6x50mm
Bolts (2) and two
Nuts (3).
• Firmly tighten all
screws.
Review all steps and understand assembly before beginning.
Do not fully tighten hardware until all components have been loosely assembled.