Owners manual

GSI-328
Warning
• Keep fountain out of reach of children.
• Use proper power source as indicated on water pump label.
• Keep electrical cords away from all heat sources. D not place electrical cords in high temperatures.
• Check water level at pump location regularly, avoid damage the pump must be fully submerged.
PARTS:
A. Basin -1pc
B. Pump and Transformer with spot light -1pc
C. Fountain body-1pc
D. Pebbles-1 bag
ASSEMBLY:
1. Insert the pump into the basin and connect the pump with the hose.
2. Connect the transformer.
3. Put the fountain body onto the basin.
4. Insert the spot light to the top of the fountain body.
5. Place pebbles on top of the basin, and spread out.
6. Fill with water, and then plug fountain into electrical outlet.
Troubleshooting:
Pump operates but no water flow: Make sure pump is fully submerged in water. If there is still no water flow, please
turn pump on then off several times.
Water speed: Adjust the switch control located on the pump housing.
Noise from pump/Fountain: Make sure pump is fully submerged in water.
Light does not shimmer: Check the light blub to make sure that it is connected to socket.