User Manual

Auto Test
LED Charge
LED On
LED AC.
ON
AC
Charge
Auto Test
Indicators
Indicate that the unit is set to
perform automatic self-tests
Indicate the battery charging status
Indicate that the unit is receiving
a power
Indicate that the unit is receiving
a power supply
Indication
Lights
Display Meaning
- A continuous green light
- The green light turns off
- A continuous orange light
- The orange light turns off
- A continuous red light
- A continuous green light
- A red light blinks once
every 2 seconds
- A red light blinks three
times every 2 seconds
- A red light blinks four
times every 2 seconds
- A continuous green light
- The green light turns off
- A green light blinks on
and off
- The unit is turned on and operational
- The unit is not turned on
- The unit is receiving a normal AC power supply
- The unit is not receiving an AC power supply
- The battery is charging
- The battery is fully charged
- The Low Voltage Indicator is warning that the battery’s
charge is about to fall below the Voltage Cut-Off point
- The Battery Testing Fault is indicating that the battery
can only hold less than 30 minutes of charge
-The Battery Charging Fault is indicating that the
battery is still not fully charged even after 10-15 hours
of charging
- The ON button has been pressed on the remote to
turn on the automatic battery testing
- The OFF button has been pressed on the remote to turn
off the automatic battery testing
- The unit is performing a battery test