Installation Guide

INSTALLATION
2. Pass your garden hose through the square retainer ring and screw it to the hose connector on the
hose reel. The hose is now ready to wind around the spool.
1. Align the holes in the crank handle (A) with the crank handle shaft on the hose cart. Insert the
bolt(Aa) into the crank handle and tighten with supplied wrench.
3. Remove the metal right bracket of the hose guide components, keep the 2 bolts.
Remove the metal limit rod, load the garden hose into the pulley groove of the hose guide device. Roll
the pulley to the far left of the plastic screw rod.