User's Manual

Preassemble the table support screws

Twist two M6X12 screws into the stand for 5-10 rounds.

Preassemble the table

Hang the table support onto the two screws.

Fix the table

Fix the table with stand by four M6X12 screws

and fasten all the screws.

Separate the stand

Separate the plastic front shell from the metal stand carefully.

Fix the stand on the baseplate

Fix the stand on the baseplate by four M10X20 screws.

C Installation Steps of Floor-standing with Table

(The same installation steps of the baseplate, stand and host with the Floor-standing)

D Installation Steps of Eco-service expansion