User's Manual

Open flip panel

Press the buttons on both side of the host at

the same time to open the flip panel.

Open paper storage cover

Toggle downward the printer driving lever to

open the paper storage cover.

Put in paper

Put in the 80mm thermal sensitive paper with a roller

in it and pull out a section outside the printer exit.

Close the paper storage cover and flip panel

Press both sides of the paper storage cover to close it.

The printer will automatically cut paper in power on state.

In power off state, it is necessary to manually tear off

excessive paper; Close the flip panel.

Paper Changing Steps for the Inside Printer

Camera used to shoot human face.

Face camera

Touchable screen applied for customer usage.

Touch screen

Used to print receipt.

Printer

Used to read codes.

Code scanner

In standby state, short press to boot, short press

again to be in standby mode;

In service state, long press for 2 to 3 seconds to

choose to shut-down or restart;

In the state of power-on,long press for 11 seconds

to shut down the host.

System switch

Used to control the host power supply.

Host switch

Face camera

Touch screen

Printer

Host switch

Nameplate

System switch

Code scanner

Trumpet

NFC

Indicator light

· Supports reading and writing of M1\ID\CPU card.

NFC

Brief Introduction of Self-Service Kiosk