User's Manual

Manufacture:Shanghai SUNMI Technology Group Co.,Ltd.
Address: Room 605, Building 7, No. 388, Songhu Rd,Shanghai, China.
Mail:[e-mail]
Phone:[phone]
Product certificate
Inspection Qualified
Free warranty is not available for:
· Dismantle and repair the product without permission.
· The bar code and fragile stickers of the product are
damaged,and the warranty card is altered or incomplete.
· Failure to operate the equipment in accordance with
the instructions.
· Artificial damage caused by failure, scratch or damage
due to water inflow or falling.
· Failure or damage caused by force majeure.
· Beyond the warranty period.
Contact information:
· Company address:
· Contact number:
Product warranty card
Product Name:
Product model:
Product No.:
Date of purchase:
Warranty period: from the date of purchase, our company
provides day warranty service.
Table for Names and Content Identification of Toxic
and Hazardous Substances in this Product
Points for Attention
The End
FCC Statement
·Please take attention that changes or modification not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
·This device complies with Part 15 of the FCC Rules.Operation is
subject to the following two conditions:
·(1)This device may not cause harmful interference,and
·(2)This device must accept any interference received, including
interference that may cause undesired operation.
·This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the
radiator & your body.
CE certification information (SAR)
This device was tested for typical body-worn operations with
the back of the handset kept 0mm away.To maintain
compliance with RF exposure requirements,use accessories
that maintain a 0mm separation distance between the user's
body and the back of the handset.The use of belt clips,holsters
and similar accessories should not contain metallic components
in its assembly.The use of accessories that do not satisfy these
requirements may not comply with RF exposure requirements,
and should be avoided.
If you are using pacemaker,hearing aid,cochlear implant or other
device,please use the phone according to the doctor’s advice.
Safety warning
Please plug the AC plug into the AC socket corresponding
to the identifcation input on the power adapter of the
accessory;
·It is strictly forbidden to use it at a site with the existence
of any potential explosive gas;
·Non-professionals are not allowed to open the internal
module at will, to avoid danger.
·This is a A grade product. In the living environment, this
product may cause radio interference.
In this case, the user maybe required to apply feasible
measures against the interference.
Suggestions
·Do not use it near the water or in the humid environment, to
prevent the liquid from dropping into the terminal;
·Do not use it in extreme cold or hot environment. For example:
near the ignition source or lighted cigarette;
·Do not drop, throw or bend it;
·Try best to use it in clean and dust-free environment, to prevent
small items from dropping into the terminal;
·Do not use it nearby the medical devices when not allowed.
Statement
Our company will not be responsible for the results of the
following actions
Damage caused by usage & maintenance not under the
conditions of this guidance note;
Our company will not be responsible for any damage or
problem caused by any option or consumable (not the
initial product or recognized product provided by our
company). You have no right to make product company;
Disclaimer
Due to the product update, certain details of this document may be
inconsistent with the product.
Please refer to the material item. Our company owns the interpre-
tative right of this document. We reserve the right to modify this
user guide without giving advance notice.
Important Safety Instructions
·Avoid it to be installed or used during the thunder &
lightning period,otherwise there will be risk of being
electrically shocked by it;
·When you have discovered unusual odor, overheat or
smog, please cut off the power supply at once!
·The paper knife is relatively sharp,please don't touch it!
indicates that the content of the toxic and hazardous substance in all homogeneous materials of the component is
below the limit specified in SJ/T 11363-2006.
indicates that the content of the toxic and hazardous substance in at least one homogeneous material of the
component exceeds the limit stipulated in SJ/T 11363-2006. However, as for the reason, because there is no
mature and replaceable technology in the industry at present.
：
：
The products that have reached or exceeded environmental protection service life should be recycled and reused
according to the Regulations on Control and Management of Electronic Information Products, and should not be
discarded randomly.
Part Name
Toxic or Hazardous Substances and Elements
Pb Cd
Cr(VI)
PBB
Circuit Board Component
Structural Component
DBPHg PBDE DEHP BBP DIBP
Packaging Component
Points for attention about the power supply
·Please unplug the plug from the power supply AC socket
to completely disconnect the power supply connection of
the device;
·The power supply socket should be installd near the
device, and be easy to contact.