Mounting Instructions

 Panels have an obvious crease which will cause stress on the cells

 Panels are flexing in multiple directions causing increased stress on the cells

Walking on the panels (Solbian anti-slip panels ONLY)

Solbian anti-slip surface panels are the only panels sold by Exotronic that allow the panel to be

walked on, provided they are installed in the following manner:

• using bi-adhesive backing;

• onto flat, smooth, continuous surface (no bumps, hollows or irregularities).

Panels must only be walked on by people taking care whilst barefoot or wearing flat, soft-soled shoes.

Heels or shoes with a rigid sole will cause damage to the panel.

Uninstalled panels or panels in removable installations (using eyelets etc.) must not be walked on.

Walking on panels should be avoided, only walk on the panels when necessary.

Maintenance

To ensure your solar panels are performing optimally, be sure to keep on top of this simple

maintenance checklist.

• Clean on a regular basis with neutral soap & clean water, using a soft sponge or cloth;

• If in a marine environment, wash regularly with fresh water to avoid damage caused by

saltwater;

• Periodically inspect the mechanical and electrical connections;

• Denatured alcohol (methylated spirit) can be used to remove grease etc.

Ongoing Support

Exotronic only supplies to reputable and competent companies, please contact your distributor for all

support enquiries.