Mounting Instructions

© Exotronic, 2022 - not to be used or distributed without permission Page 15 of 19
Method 5 – Eyelets
Exotronic can punch stainless steel eyelets into the panel at various intervals (please advise at time of
purchase) along the panel. Rope or similar material can then be used to tie the panel down to a
supported surface.
Enough eyelets must be attached alongside each panel edge to fully support the panel. The size of
panel will determine the adequate number of eyelets. Speak to our technicians to confirm based on
the panel you’ve purchased.
Combination of eyelets & Rope.
Combination of eyelets, rope & rope clamp.