Mounting Instructions

Method 5 – Bi-Adhesive Backing

Bi-Adhesive backing is available for purchase with your panels. This method is required if you plan to

walk on your panel (please read Walking on the panels for greater detail). This method is an easy

‘peel and stick’ method, however, be mindful not to over-flex the panel in the process.

While the durability of the Sunman eArc panels is unmatched, they are not designed to be anti-slip,

and therefore walking on is not recommended

Method 6 – Onto Checker Plate (or other highly textured surfaces)

High bond tape does not bond well to checker plate and there are very few adhesives suitable for

polycarbonate (i.e. The strips in our vented gap kit). Some adhesives may appear to bond well at the

start but then lose adhesion over time. For these reasons, we recommend that another medium such

as aluminium composite (as a sheet or cut into strips) be used in between the checker plate and tape.

Attach the aluminium to the checker plate with screws, pot rivets or a suitable adhesive then use of

one of our standard mounting methods to mount the panel to the aluminium.