Warranty

ProductionNumber:XXXXXXXX MadeInChina3/4
ASSEMBLY STEPS
Fig.1: Insert the lower end of Rear tube
(A) into the tube of base (D), fasten
them with Bolt (AA) and washer (CC).
Fig.2: Insert the curved tube (B) into the
upper end of rear tube (A) , then insert
the lower ends of curved tube (B) into
the base (D), fasten it by using bolts
(AA) and washers (CC).
Fig. 3: Attach the basket (C) to the base (D) using
bolts (BB) and washers (CC) at back side.
Fig.4: Secure the basket (C) to the base (D) using
bolts (DD) and washers (CC) at front side.