Use and Care Manual

3 / 6
Country of Origin: China





Fig.1: Insert the Post A1 (A2) into the Base Cover(C), then connect Base (B) and Post A1 (A2) with Bolt
(AA) and Flat Washer (BB).
Fig.2: Insert Long Screen (D) into Post A1 (A2), then lock Long Screen (D) to post A1 (A2) with the Bolt
(CC).
Fig.3: Insert short screen (E) into post A1 (A2), then lock Short Screen (E) to Post A1 (A2) with Bolt (CC).
Fig.4: Insert Top Boundary Beam (G) into the tube of Long Screen (D).
Fig.5: Insert the circular tube of Top Beam (F) into Long Screen (D).
Fig.6: Put the larger Cover (I), tie the Velcro onto the Screen, then lock Panel (H) to post A2 (A1) with
Bolt
(
CC
)
.