ITEM NO.: A101012500 WE HAVE YOU IN MIND, LET US SERVE YOU! Questions? Issues? CONTACT US 24 hours / 7 days a week www.sunjoyonline.com customer.care@sunjoygroup.
/8 Parts List Screen A P006300081 4 Long Beam D P000400936 2 Short Beam E P000400937 2 P000601475 8 P000601472 4 P000601471 4 P000601474 2 P000601473 2 P000601470 4 P000501255 1 P000601469 4 P000501254 1 Pipe under slant F beam Slant Beam For G Big Roof（long） Slant Beam For H Big Roof（short） Middle Beam I （long） Middle Beam J （short） Pipe upper slant K beam Big top L connector Slant Beam For M Small Roof Small top N connector Hook O P005800001 1 Finial P P001000037 1
/8 Hardware Pack 1 AA H010020011 M6X15 bolt 16PCS BB H050010020 M6 flat washer 16PCS W H090010017 M6 wrench 1 PC Fig.
/8 Fig.2: Attach Long Beam（D） to Screen（A） by using bolt（AA）,washer（BB）.the same to the short beam（E）。 Hardware Pack 2 BB H050010020 M6 flat washer 8PCS CC H010110029 M6*35 bolt 4PCS DD H040010004 M6 nut 4 PC Fig.3:Screw the hook(O) to big top connector(L),then Insert Pipe upper slant beam(K) to big top connector(L). Country of Origin: China Fig.4: Insert Slant Beam Fig.5: Insert Slant Beam For Big Roof（long/short） (G/H) to Pipe upper slant beam(K).
/8 Fig.6: Insert Pipe under slant beam(F) to screen(A). Fig.7: Insert Middle Beam（long/short） (I/J) to big top connector(L). Fig.8: Attach Middle Beam Fig.9: Insert Slant Beam （long/short）(I/J) to Long Beam （D）and short Beam (E) by using bolt (CC),washer (BB) and nut For Small Roof(M) to Small top connector（N）. Fig.10‐1、Fig.
/8 Fig.12:Install the top flower (P)on the top of the small top. Fig.13:Put big canopy (R) to big top,don’t open， then Insert small top to Pipe upper slant beam(K).
/8 Fig.12:After adjusting the top top cloth the top,adjust the adjusting pipe until the top cloth is tight. Fig.15:Hang.Mosquito Netting(S) to Beam by using ring(EE). Country of Origin: China Fig.
/8 Care and Maintenance Our steel components for garden accessories and furniture are treated with rust inhibiting paint that protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once these protective coatings are scratched. This is not a defect and thus not covered by the warranty. To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint.
