ITEM NO.:A101012100 WE HAVE YOU IN MIND, LET US SERVE YOU! Questions? Issues? CONTACT US 24 hours / 7 days a week www.sunjoyonline.com customer.care@sunjoygroup.
/8 Safety Information 1. Two people are required for this assembly. 2. DANGER: This unit is heavy! Do not assemble this item alone. Some parts may contain sharp edges. Wear protective gloves. WARNING: Do not leave the gazebo where there 3. is a risk of high wind, as possible damage will When assembling and using this product, basic safety precautions should always be occur to the structure. followed to reduce the risk of personal injury and damage to equipment.
/8 Parts List Description Label Part# Qty Screen 1 A P006300073 4 Screen 2 B P006300074 4 Short across beam C P000400868 2 Long across beam 1 D P000400870 2 E P000400869 2 F P000601308 4 G P000601309 2 H P000601310 2 J P000501141 1 Adjust tube K P005700643 4 Hook L P005800001 1 M P000501142 2 N P000501143 2 Finial P P005600298 4 Big canopy Q P001100524 1 Small canopy R P001100525 1 Long across beam 2 Slanting beam upper tube Middle beam （Long） Mi
/8 Hardware Pack 1 Label Description Part# Qty AA M6X15 Bolt H010020011 4PCS BB M6 flat washer H050010023 48PCS CC M6X30 Bolt H010020023 28PCS DD M6 nut H040010003 16 PCS W1 M6 Wrench H090010008 2 PCS Country of Origin: China Image
/8 Fig.1：Attach screen1（A）to screen2 （B），then fix by using Bolt（CC）and Flat washer（BB）. Fig.2：Insert Long across beam 1(D) into Long across beam 2(E) then fix by using Bolt（AA） and Flat washer（BB）. Fig.3：Attach the across beam（C/D/E）to screen（A/B）fix by using Bolt（CC）and Flat washer （BB）nut（DD），form the whole framework. Hardware Pack 2 Label Description Part# Qty BB M6 flat washer H050010023 4PCS AA M6X15 Bolt H010020011 4 PCS Image Fig.
/8 Fig.7：Insert Middle beam(G/H) to Big top connector(J). Fig.8：Attach Connector for Slanting Beam（G/H）to across beam fix by using Bolt（AA）and Flat washer （BB）.then Put big canopy（Q）on big top frame( Do not fasten corner)。。 Fig.9：Insert Adjust tube(K) to Slanting beam upper tube(F)，then Adjust the Adjust tube(K) to the minimum.
/8 Fig.10：Put small canopy（R）on small top frame. Fix small canopy four corner to adjustable tube， then adjust the tube to right position until small canopy tight. Fig.11: Fix big canopy four corner then Attach Finial(P) to the top. Fig.12：by using stake“7”(FF) gazebo on ground.
/8 Care and Maintenance Our steel components for garden accessories and furniture are treated with rust inhibiting paint that protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once these protective coatings are scratched. This is not a defect and thus not covered by the warranty. To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint.
