ITEM No.:A101011000 WE HAVE YOU IN MIND, LET US SERVE YOU! Questions? Issues? CONTACT US 24 hours / 7 days a week www.sunjoyonline.com customer.care@sunjoygroup.
∙∙ Parts List Description Label Part No Qty Big top connector D1 P000501158 1 Hook E1 P005800001 1 Middle beam F3 P000601325 4 Slanting beam upper tube G4 P000601323 4 Slanting beam lower tube G5 P000601324 4 Long across beam H1 P000400881 4 Short side beam I1 P000400882 4 Shelf J P002300068 4 Screen 1 K5 P006300075 4 Screen 2 K6 P006300076 4 Big canopy L1 P001100530 1 Small canopy M1 P001100531 1 Mosquito netting N P001200206 1 Adjust tube P P00570
∙∙ Hardware Pack 1 label Description Part No.
∙∙ 4/9 . Fig.1: Attach screen1（K5）to screen 2（K6）,then fix by using bolt（AA）and flat washer（BB） Fig.2: Insert long across beam（H1）into short across beam（I1）. Fig.3‐1:Insert assembled across beam（H1 end） into screen 1 （K5）. Fig.4: Place shelf（J）to screen. Country of Origin: China Fig.3‐2: Insert assembled across beam （ I1 end ） into screen 2（K6）.
∙∙ 5/9 Hardware Pack 2 Label Description Part No Qty BB M6 flat washer H050010023 8PCS CC M6 Nut H050010023 4PCS DD M6*35 bolt H010110029 4PCS Fig.5:Insert slanting beam lower tube（G5）into slanting beam upper tube（G4）. Country of Origin: China Fig.6: Insert slanting beam upper tube（G4）into big top connector(D1）. Fig.7: Insert beam lower into screen.
∙∙ Fig.8: Insert middle beam（F3）upper end into big top connector （D1）. Fig.9: Attach middle beam（F3）lower end to long across beam (H1)，fix by using bolt（DD）a,flat washer （ BB ） and nut （CC）. Fig.10‐1: Attach adjustable tube(P) to slanting beam upper tube（G4），slanting beam lower tube（G5）， Middle beam lower end (F3）. Fig.10‐2: Attach adjustable tube(P) to inmost hole. Hardware Pack 3 Label Description EE Ring P005800027 48 PCS FF Φ6X230MM H070010002 16 PCS Country of Origin: China Part No.
∙∙ Fig.11:Put big canopy（L1）on big top frame( Do not fasten corner). 7/9 Fig.15: Put small canopy （M1）on small top frame. Fig.13、Fig.13‐1: Fix small canopy four corner to ，then adjustable tube（P） adjust the tube to right position until small canopy tight.
∙∙ Fig.14: Close small canopy (M)corner mesh. Fig.16: Close big canopy （L1）fringe. Fig.15 、 Fig.15‐1: Fix big canopy four corner （L1 ）to adjustable tube（P），then adjust tube in proper position until the big canopy tight. Fig.17: Fig.17: Hang mosquito netting (N) on across beam by using ring (EE). Fig.19: Attach hook（E1） to big top connector（D1）， then tighten hook. Country of Origin: China 8/9 Fig.18: by using stake“7”(FF) fix assembled gazebo on ground.
∙∙ 9/9 Care and Maintenance Our steel components for garden accessories and furniture are treated with rust inhibiting paint that protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once these protective coatings are scratched. This is not a defect and thus not covered by the warranty. To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint.
