Replacement Part List

6 / 9
Country of Origin: China
Fig.7:Attach Big top frame(short)（N2） to Big top frame(long)(N1) by using bolt (DD) and washer (BB).
Fig.8:Attach Slanting bar(F) to the top of post by using bolt (AA) and washer（BB）.
Fig.9:Install the Slanting bar(F) into the Slanting bar connector(H)of the Slanting bar(F), and then use the
bolt(CC)through the gasket(BB)to fix(H) at her lower end of large roof frame.
Fig.10: Insert middle beam（G1/G2）to middle beam connector（I）.
Fig.11: Attach middle beam (G1/G2) to Big top frame(N1/N2) by using bolt (CC) and washer (BB) Put big
canopy(R) to the top, Don’t open.
Fig.12:Insert Slanting bar for small top(L1/L2) to Small top connector(K),then screw the hook(M) to Small
to
p
connecto
r
(
K
)
.
Fig.13-1、Fig.13-2:Insatll the regulating pipe(U) into the Slanting bar for small top and minimize the
regulating pipe(U).
Fig.13: Put Small canopy(Q) to the small top.
Fig.14-1、Fig.14-2：Put small canopy
four corner（Q） to small top frame end
of adjustable tube（U）（as Fig.14-2）
adjust tube length till the canopy tight.