ITEM NO.: A101003202 WE HAVE YOU IN MIND, LET US SERVE YOU! Questions? Issues? CONTACT US 24 hours / 7 days a week www.sunjoyonline.com customer.care@sunjoygroup.
/9 Safety Information two people are required for this assembly. Some parts may contain sharp edges. Wear DANGER: This unit is heavy! Do not assemble this item alone. protective gloves. When assembling and using this product, WARNING: Do not leave the gazebo where there basic safety precautions should always be is a risk of high wind, as possible damage will followed to reduce the risk of personal occur to the structure. injury and damage to equipment.
/9 Parts List Post A P000200487 4 Base B P006100183 4 Base cover C P000100346 4 Long Frame 1 D1 P000400941 2 Long Frame 2 D2 P000400940 2 Short Frame 1 E1 P000400938 2 Short Frame 2 E2 P000400939 2 Slanting bar F P000601480 4 Long middle beam G1 P000601479 2 Short middle beam G2 P000601478 2 Slanting bar connector H P000501260 4 Finial for corner J P005600324 4 Small top connector K P000501256 1 Slanting bar 1 for small top L1 P000601476 2 Slanting b
/9 Short netting bar O2 P005700698 4 Finial P P005600323 1 Regulating tube U P005700731 4 Small canopy Q P001100579 1 Big canopy R P001100580 1 Curtain S P001300109 1 Mosquito Netting T P001200227 1 Hardware Pack 1 AA H010110016 M6*15 Bolt 16 PCS BB H050010020 M6 flat washer 64 PCS CC H010020011 M6*15 bolt 32 PCS DD H010020015 M6*25 bolt 16 PCS W H090010017 M6 Wrench 1 PC Country of Origin: China
/9 Fig.1:Put Base cover（B）through Post（A）and lift up base cover，then attch base（C）to bottom of post（A）by using bolt(AA)、washer (BB). Fig.2:Attach Finial for corner(J) to top of post(A) by using bolt(AA)、washer (BB). Fig.3:Insert Frame（D1/E1） to Frame（D2/E2）,then by using bolt（CC）and washer （BB）. Fig.4:Attach middle beam connector(I) to frame by using bolt（CC）and washer（BB） Fig.5:Attach netting bar(O1/O2) to frame (D1/D2/E1/E2) by using bolt (CC) and washer (BB). Fig.
/9 Fig.7:Attach Big top frame(short)（N2） to Big top frame(long)(N1) by using bolt (DD) and washer (BB). Fig.8:Attach Slanting bar(F) to the top of post by using bolt (AA) and washer（BB）. Fig.9:Install the Slanting bar(F) into the Slanting bar connector(H)of the Slanting bar(F), and then use the bolt(CC)through the gasket(BB)to fix(H) at her lower end of large roof frame. Fig.10: Insert middle beam（G1/G2）to middle beam connector（I）. Fig.
/9 Fig.15: Screw Finial(P) to Small top connector(K). Fig.
/9 Fig.17:Expand big canopy(R)，then hook to frame。 Fig.18:Hang Curtain(S) and Mosquito Netting（T）by using Ring（FF）. Curtain(S) is outside. Fig.19: By using stake(EE) fix assembled gazebo on ground.
/9 Care and Maintenance Our steel components for garden accessories and furniture are treated with rust inhibiting paint that protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once these protective coatings are scratched. This is not a defect and thus not covered by the warranty. To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint.
