Installation Guide



















Care & Maintenance
Before using, clean the chair completely with a soft dry towel. When not in use, wipe free of any dirt
or loose objects, wash with a mild solution of soap and water; rinse thoroughly and dry completely.
Do not use strong detergent or abrasive cleaners.
Limited Manufacturer’s Warranty:
This product carries a 1 year warranty against defects in workmanship and materials. We agree to
replace the defective product free of charge within the stated warranty period, when returned by the
original purchaser with proof of purchase. This product is not guaranteed against wear or breakage
due to misuse and/or abuse.
Exclusions:
Items used for commercial, contract, or other non-residential purposes, or items damaged due
to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or
rusting of hardware is not covered. Proof of purchase (dated register receipt) is required for
warranty claims. Warranty is to the original purchaser and is non-transferable. Any
replacement of warranted items will be in the original style and color, or a similar style and
color if the original is unavailable or has been discontinued. As some states do not allow
exclusions or limitations on an implied warranty, the above exclusions and limitations may not
apply. This warranty gives you specific rights, and you may also have other rights, which vary
from state to state.
Step 3: Turn over Seat Board (A). Attach the
assembled leg to Seat Board (A) by Bolt (BB),
Spring Washer (FF) and Flat Washer (DD) as
shown in Fig 5. Then lock all the bolts tightly by
Hex Key (EE).
Turn up the assembled chair. Your chair is now
ready for use. Relax & Enjoy!
