Use and Care Manual

Assembly:

Fig.1：Insert the top support 1 (1) into the tube of the top support 2 (2) as the arrow direction by

using screw (E), flat washer (I), nut (H) and ball nut (J) to connect.

Fig.2：Using screw (A), flat washer (M), nut (L) and ball nut (N) to connect front leg (1) and

back leg (2) with top supports (1 and 2). Then using screw (B), flat washer (I), nut (H) and ball

nut (J) to connect front leg (3) with back leg (4).