Use and Care Manual

Step 2: Connect Foot connector (A) to Front foot (C1) & Back foot (C2) by using bolt
(BB), washer (CC) and nut (DD), then cover Plastic cap (AA).
Step 3: Connect Top beam (D) to
Front foot (C1) & Back foot (C2) by
using bolt (FF), washer (GG) and
nut (HH), then cover Plastic cap
(EE), as Fig.1. Connect Foot
connect bar (F) to Back foot (C2)
by using bolt (MM), washer (CC),
nut (DD), then cover Plastic cap
(AA), as Fig.2.