Installation Guide

11 of 11
damage arising from the installation or operation of the product and/or the failure of any part for any
reason.
 There are no other express or implied warranties, except for those stipulated herein. This warranty
gives specific rights and the original purchaser may have additional rights and remedies in law.
 This warranty does not cover commercial use.
CLEANING AND MAINTENANCE
 To enjoy outstanding performance of your appliance for years make sure to perform the following
maintenance activities on a regular basis.
 Keep exterior surfaces clean.
 Use warm soapy water for cleaning. Never use flammable, corrosive or abrasive cleaners.
 Clean the holes in the burner using a swab that is moistened with soapy water. Keep the holes
unobstructed by using a heavy-duty pipe cleaner. The burner must be dry before normal use. Cleaning
period should be 1 year.
 While washing your unit, be sure to keep the area around the burner and pilot assembly dry at all
times. If the gas control is exposed to water in any way, DO NOT try to use it. It must be replaced.
 After a long break from operation, the unit should be inspected for spiders, spider webs or other
insects.
 Air flow must be unobstructed, Keep controls, Burner and circulating air passageways clean.
Signs of possible blockage include:
—Gas odor with extreme yellow tipping of flame.
—Table does NOT reach the desired temperature.
—Table flow is excessively uneven.
—Table makes popping noises.
—Spider and insects can nest in burner or orifices.
—Compressed air may help clear away smaller particles.