Use and Care Manual

ASSEMBLY INSTRUCTIONS
1. Turn the Tabletop (A) over on a clean and
soft surface; attach Leg (B) onto (A) using
Bolts (BB) and Washers (CC) as shown in
Fig. 1. Do not fully tighten the connections
in this step.
Hardware Used
x 8
M6 x 15 mm Bolt
1
2
3
A
C
B
F
H
I
B
BB
CC
CC
CC
FF
DD
AA
BB
CC
2. Attach the Base (C) to (B) using Bolts (AA),
Washers (CC), and Washers (DD) as shown
in Fig. 2. Fully tighten all connections after
this step.
3. Attach Left and Right armrests and legs
(F & H) to Seat (I) using Bolts (FF) and
Washers (CC) as shown in Fig. 3.
Do not fully tighten connections in this step.
x 8
M6 Washer
Hardware Used
x 8
M6 x 25 mm Bolt
FF
CC
x 8
M6 Washer
Hardware Used
x 8
M6 x 50 mm Bolt
AA
CC
x 8
M6 Washer
DD
x 4
50 x 25 mm Washer
March 2016 Made in China 4/8