Use and Care Manual

HARDWARE CONTENTS (Shown to size)
Qty. 12
AA
SAFETY INFORMATION
PREPARATION
WARNINGS
Paint on this product might peel off if it is hit seriously or used improperly. Use and carry it with care, and
apply touch-up paint whenever necessary.
Some parts may contain sharp edges. Wear protective gloves as necessary.
CAUTIONS
Read and follow all instructions before assembly.
Repeated assembly can weaken the locking ability of the washers. Periodically check all bolted connections
on your furniture to make sure they are tight and secure. Retain these instructions for future reference.
Do NOT overtighten any of the nuts as this may damage the threads. Tighten each nut firmly and properly.
Chair Weight Capacity: 225lbs.
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble the
product. Contact customer service for replacement parts.
Estimated Assembly Time: 30 minutes
Tools required for assembly: Wrench (included)
Qty. 16
BB
Qty. 48
CC
Qty. 4
DD
Qty. 4
EE
Qty. 16 Qty. 1
FF GG
Please read and understand this entire manual before attempting to assemble, operate or install the
product. If you have any questions regarding the product, please call customer service at 1-866-578-6569,
8 a.m. - 8:00 p.m., PST.
M6 x 50 mm
Bolt
M6 x 15 mm
Bolt
M6
Washer
M6 x 55 mm
Bolt
M6 x 25mm
Bolt
M6
Wrench
50 x 25 mm
Washer
March 2016 Made in China 3/8