OWNER'S MANUAL ITEM: L-BS265SAL-1 L-BS265SAL-1D L-BS265SAL-1F Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-578-6569, 8 a.m. - 8:00 p.m., PST.
PACKAGE CONTENTS E A F H G B I J C L D K PART DESCRIPTION QUANTITY PART DESCRIPTION QUANTITY A Table top 1 H Right armrest & Leg 2 B Leg 4 I Seat 2 C Base 1 J Foot support rail 2 D Adjustable foot leveler (Preassembled on Part C) 4 K 4 E Back 2 Front foot washer of chair (Preassembled on Part F & H) F Left armrest & Leg 2 G Seat cushion 2 L Back foot washer of chair (Preassembled on Part F & H) 4 March 2016 Made in China 2/8
HARDWARE CONTENTS (Shown to size) AA BB CC DD EE FF GG M6 x 50 mm Bolt M6 x 15 mm Bolt M6 Washer 50 x 25 mm Washer M6 x 55 mm Bolt M6 x 25mm Bolt M6 Wrench Qty. 12 Qty. 16 Qty. 48 Qty. 4 Qty. 4 Qty. 16 Qty. 1 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any questions regarding the product, please call customer service at 1-866-578-6569, 8 a.m. - 8:00 p.m., PST.
ASSEMBLY INSTRUCTIONS 1. Turn the Tabletop (A) over on a clean and soft surface; attach Leg (B) onto (A) using Bolts (BB) and Washers (CC) as shown in Fig. 1. Do not fully tighten the connections in this step. 1 BB CC B Hardware Used BB M6 x 15 mm Bolt x8 CC M6 Washer x8 2. Attach the Base (C) to (B) using Bolts (AA), Washers (CC), and Washers (DD) as shown in Fig. 2. Fully tighten all connections after this step.
ASSEMBLY INSTRUCTIONS 4. Attach Back (E) to (I) using Bolts (EE) and Washers (CC) as shown in Fig. 4. Do not fully tighten connections in this step. 4 E CC Hardware Used EE EE M6 x 55 mm Bolt x2 CC M6 Washer x2 5. Connect (E) and (F & H) using (AA) and (CC) as shown in Fig. 5. Do not fully tighten connections in this step. I 5 E F H Hardware Used AA M6 x 50 mm Bolt x2 CC M6 Washer x2 6. Attach Foot support rail (J) to front leg of (F & H) using (BB) and (CC) as shown in Fig. 6.
ASSEMBLY INSTRUCTIONS 7. Put the Seat Cushion (G) on the seat, then tie the VELCRO® to (I) as shown in Fig. 7.
CARE AND MAINTENANCE Before using, clean the product completely with a soft, dry towel. When not in use, wipe free of any dirt or loose objects, and wash with a mild solution of soap and water; rinse thoroughly and dry completely. Do not use strong detergent or abrasive cleaners. Store the product in a cool, dry location away from sunlight.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-866-578-6569, 8 a.m. - 8:00 p.m., PST.
