Installation Guide

ManualsBrandsSunjoy ManualsOutdoor Lounge FurnitureFairbanks Natural Brown Patio Conversation Set

October 16 Made in China 1 / 4

ASSEMBLY INTRUCTION

ITEM#：D-DNC485PWD

WARNING:

Repeated assembly can weaken the locking ability of the screw/bolt/nut. Periodically check all bolted connections on

your product to make sure they are tight and secure. Keep these instructions for future reference.

Some parts may contain sharp edges. Wear protective gloves as necessary.

Set it up on the level ground.

Attention: Please notice there are split lines in the wood logs. These are NOT defects. These are factory created to

allow expansion and contracting as the weather changes throughout the year.

Important: For technical assistance on assembly or replacement parts, please call Sunjoy Industries at 1(866) 578-6569

from 8:00 AM EST to 8:00 PM PST. You may email to customer.care@sunjoygroup.com or visit

www.sunjoyonline.com to place your order or fax your parts replacement order form (which is included in the

packaging) together with your purchase receipt to 1 (740) 283-3549 for assistance.

Summary of content (4 pages)

PAGE 1
ASSEMBLY INTRUCTION ITEM#：D-DNC485PWD WARNING: Repeated assembly can weaken the locking ability of the screw/bolt/nut. Periodically check all bolted connections on your product to make sure they are tight and secure. Keep these instructions for future reference. Some parts may contain sharp edges. Wear protective gloves as necessary. Set it up on the level ground. Attention: Please notice there are split lines in the wood logs. These are NOT defects.
PAGE 2
PARTS LIST PART# A B C D1 D2 E F G H DESCRIPTION Front Leg DNC0485XXX01 Back Leg DNC0485XXX02 Armrest DNC0485XXX03 Back 1 DNC0485XXX04 Back 2 DNC0485XXX05 Table Plate DNC0485XXX06 Chair Support bar DNC0485XXX07 Table Support bar DNC0485XXX08 Seat DNC0485XXX09 QTY 2 2 2 1 1 1 2 2 1 HARDWARE PACK PART# AA BB CC DESCRIPTION Screw M4x40 ZS04040E Screw M8x100 SM08100C Washer M8 UD08C QTY 30 2 2 ASSEMBLY STEPS Step 1: Insert Back Leg (B) into Front Leg (A), insert Front Leg (A) into Armrest(C).
PAGE 3
Step 3: Fasten Back Leg (B) and Front Leg (A) with Screw AA (see Fig1). Fasten Seat (H) and Front Leg (A) and Back Leg (B) with Screw AA (see Fig2). Attach Chair Support bar (F) to Front Leg (A) and Seat (H) with Screw AA (see Fig3). connections fit Ensure all properly before tightening screws. Step 4: Insert Back 1 (D1) into Seat (H), then fasten them with Screw AA.
PAGE 4
Step 6: Attach Back 2 (D2) to Seat (H) with Screw AA. Attach Armrest (C) to Back (D1&D2) with Screw BB and Washer CC. Attach Armrest (C) to Front Leg (A) with Screw AA. Tighten all screws before use. Now, your Tete-a-Tete is ready to use and enjoy! Limited Warranty: This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item provided the item is maintained with care and used only for personal, residential purposes.