Use and Care Manual

Chair assembly instruction
Part
#
Description
QTY
A Back
1
B Armrest1
1
C Armrest2
1
D Seat
1
E1
Front side Leg
2
E2 Backside Leg
2
F
Decorative part
1
G Support bar
2
AA Bolt M6x35
20
BB Spring washer M6
20
CC Nut M6
20
DD Wrench M6
2
Foot Pad
(Preassembled on legs)
4
Step 1: Attach leg (E1/E2) to seat (D) with (AA) and spring washer (BB), lock by
nut M6 (CC) by using wrench (DD) and Philips-screwdriver as Fig. 1 shown,
don’t tighten fully. Attached the two support bar (G) to legs (E) with bolt (AA),
spring washer (BB).And nut (CC) by using wrench (DD) as Fig.2 shown.
E1
E2
E1