Installation Guide

6
Assembly (continued)
5
Attaching the canopy
6
Attaching the support bar to the
table top
□ Put the big canopy (L) onto the big top. Do not fold. Attach the
small top pole (G) to corner top pole (D) using bolts (CC),
washers (BB) and nuts (DD). Then assemble the four corners
of the small canopy (K).
NOTE: To avoid destroying the finish, please handle it with
care.
□ Attach the support bar (I) to the tabletop (H) using bolts (EE)
and washers (BB).
NOTE: To avoid destroying the finish, please handle it with
care.
7
Attaching the table top to the
poles
8
Finalizing the assembly
□ Attach the tabletop (H) to the poles (A1 and A2) using bolts
(EE) and washers (BB).
NOTE: To avoid destroying the finish, please handle it with
care.
□ Secure the other end of the support bar (I) to the poles (A1
and A2), then insert the pin on the pole into the hole at the
end of the support bar (I). Secure the gazebo using the
stakes (FF).
NOTE: To avoid destroying the finish, please handle it with
care.