Installation Guide

Hardware Pack 3
AA
M6*15 Bolt
48 PCS
BB
M6 Flat Washer
68 PCS
FF
M6*25 Screw
12 PCS
GG
M6*40 Screw
8 PCS
II
M6 Nut
1
9. Attach the Small Top Slanting Bar
(M) to the Small Top Connector (Q)
with Screws (DD), Nuts (EE) and
Flat Washers (BB). Then attach the
Hook (P) to the bottom center of the
Small Top Connector (Q) by
screwing it counterclockwise.
11. Attach the Small Roof
Top Beam (J5) to the Small
Top Slanting Bar (M) with
Bolts (AA) and Flat
Washers (BB).
12. Attach the Small Top Support
Bars (k1) to the Small Top Slanting
Bar (M) with Bolts (AA) and Flat
Washers (BB).
7. Attach the Big Top Beam
(E) to the Big Top Bar (H)
with Bolts (AA) and Flat
Washers (BB).
7. Attach the Big Top Beam
(E) to the Big Top Bar (H)
with Bolts (AA) and Flat
Washers (BB).
8. Attach the Big Top Beam
(E) to the Big Top Beam
Connector (G) with Screws
(DD) , Nuts (EE) and Flat
Washers (BB).
10. Attach the four pieces
of Small Top Slanting
Bars (M) to the Big Top
Bar (H) with Bolts (AA)
and Flat Washers (BB).