Instructions / Assembly

Fig.9: Connect Short beam (2L/2C）,Top slanting bar (2A) and Short beam 1 (2C) by using bolt (EE), washer (BB) and
nut (FF).
Fig.10: Attach short beam (2C/2L) to decorative beam by using bolt (AA) and washer (BB).
Fig.11: Connect Left support beam (2G/2K) and Right support beam(2D/2I) to middle beam(2B) by using bolt (EE),
washer (BB) and nut (FF).
Fig12： Connect Left support beam of long side (2G), Top slanting bar (2A) and Right support beam of short side (2I) by
using bolt (EE), washer (BB) and nut (FF). Connect Left support beam of short side (2K) and Right support
beam of short side 1 (2I) in same way as Fig.12.
Fig.13: Connect Right support beam(2F/2J) and another Right support beam(2F/2J) to Middle beam(2B) by using bolt
(EE), washer (BB) and nut (FF). Note: fix the end of 2F/2J with one connect hole to middle beam (B).
Fig14: Connect another end of Right support beam of long side 3 (2F), Short beam 2 (2L) and Left support beam of
long side 2 (2H) by bolt (MM), washer (BB) and nut (FF). Note: fix the end of 2F with two connect holes to short
beam 2 (2L). Connect another end of Left support beam of long side 2 (2H), Top slanting bar (2A) and Right
support beam of long side 2 (2E) by using bolt (EE), washer (BB) and nut (FF). Connect other support beam in
same way.
AA
M6*15 Bolt
8 PCS
BB
M6 Flat washer
38 PCS
DD
M6*15 Bolt
12 PCS
EE
M6*60 Bolt
4PCS
LL
M6*40 Bolt
2 PCS
FF
M6 Nut
4 PCS
GG
M6 *35 Bolt
8 PCS
Hardware Pack 3