Instructions / Assembly

Hardware Pack 2

M6*15 Bolt

32 PCS

M6 Flat washer

136PCS

M6*50 Screw

16PCS

M6*60 Screw

36PCS

M6 Nut

52 PCS

Fig.5: Attach top slanting bar (2A) to top frame (3E) by using bolt (AA) and flat washer (BB).

Fig.6: Attach top slanting bar (2A) to corner connector (1F) by using bolt (EE), flat washer (BB) and nut (FF)

Fig.7: Attach middle beam (2B) to top frame (3E) by using bolt (AA) and flat washer (BB).

Fig.8: Attach middle beam (2B) to middle beam connector (1E) by using bolt (EE), washer (BB) and nut (FF).

Fig.1：Insert decorative beam 1A(1C）to decorative beam 1B(1D), tighten with bolt (AA) & flat washer (BB).

Fig.2：Attach assembled beams to another respectively and tighten with bolt (CC) & flat washer (BB).

Fig.3：Fix the Middle beam connecter (1E) and curtain tube connecter 1(R1) on the middle of decorative beams by

using bolt (AA) & flat washer (BB)

Fig.4：Fix the Corner connector (1F) on the corner of the decorative beam with bolt (AA) & flat washer (BB).

。