Installation Guide

ManualsBrandsSunjoy ManualsGazebosRolla 10 ft. x 12 ft. Black Steel Gazebo

Assembly Instructions

NS#:110102003/110102008

Item#:D-GZ840PST-AS-16S (Black Top) / D-GZ840PST-AS-26S (Faux

Copper Top)

Congratulations on your purchase of our SUNJOY 12’x10’ Hardtop Gazebo. Our clear, easy to

follow, step-by-step instructions will guide you through the assembly process from start to

finish. All you will need is a screwdriver, a hammer and two ladders (not included) whose

height is no less than 2.5 m.

● THIS UNIT IS

WARNING:

HEAV Y

● Keep all children and pets away from assembly area. Children and pets should be supervised

when they are in the area of the Gazebo construction.

!. Do not assemble this item alone. 4 people are recommended for safe

● Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house,

overhanging branches, laundry line or electrical wires.

● Some parts may contain sharp edges. When assembling and using this product, basic safety

precautions should always be followed to reduce the risk of personal injury and damage to the

product. Please read all instructions before assembly and use.

● Check all bolts for tightness before use, and periodically check and tighten bolts as necessary.

● Assemble on level ground

Item Identification: For ease of identification, all parts are labeled to correspond to the Step number

in which the part is used

IMPORTANT

Please take time to read these instructions thoroughly and follow each step carefully for safe and easy

operation. Keep this manual for future reference.

For technical assistance on assembly or replacement parts. Please call Sunjoy Industries at

1-866-578-

6569 from 8:00 am EST to 8:00 pm PST or fax the replacement part form which is in the box to

1-740-283-3549 or Email customer.care@sunjoygroup.com for assistance.

Summary of content (10 pages)

PAGE 1
Assembly Instructions NS#:110102003/110102008 Item#:D-GZ840PST-AS-16S (Black Top) / D-GZ840PST-AS-26S (Faux Copper Top) Congratulations on your purchase of our SUNJOY 12’x10’ Hardtop Gazebo. Our clear, easy to follow, step-by-step instructions will guide you through the assembly process from start to finish. All you will need is a screwdriver, a hammer and two ladders (not included) whose height is no less than 2.5 m. WARNING: ● THIS UNIT IS HEAV Y!. Do not assemble this item alone.
PAGE 2
Parts List Big top frame A1 2 Big top bar B1 2 C1 Small top support beam Small top connector 4 D1 1 Pothook E1 1 Small top roof panel 1 F1 2 Small top roof panel 2 G1 2 Small top cover H1 4 Small top roof cover I1 1 Post A2 4 Beam connector C2 8 Base cover D2 4 Base E2 4 Slanting bar connector F2 4 Beam connector (upper) G2 4 Beam connector (down) H2 4 Short beam I2 4 Long beam J2 4 Support piece K2 8 Long pipe 1 L2a 2 Long pipe 2 L2b 2 Short pipe
PAGE 3
Top slanting bar A3 4 Top beam B3 4 Long side left roof panel 1 C3 2 Long side right roof panel 1 D3 2 Long side left roof panel 2 E3 2 Long side right roof panel 2 F3 2 Long side left roof panel 3 G3 2 Long side right roof panel 3 H3 2 Short side roof panel 1 I3 2 Short side left roof panel 2 J3 2 Short side right roof panel 2 K3 2 Short side left roof panel 3 L3 2 Short side right roof panel 3 M3 2 Big roof panel cover (corner) N3 4 Big roof panel cover (middle)
PAGE 4
Long beam of big roof (long side) (1) X5 2 Long beam of big roof (long side) (2) X6 2 Hardware Pack 1 AA M6*15 Bolt 96 PCS BB M6 Washer 270 PCS CC M6*60 Bolt 16PCS DD M6 Nut 32 PCS EE M6*35 Bolt 8 PCS FF M6*15 Bolt 112 P CS GG M6*70 Bolt 16 PCS HH M6*45 Bolt 2 PCS Z M6 Wrench 2 PCS
PAGE 5
Fig.1: Fix Big top frame A1 and Big top bar B1 by using AA, BB. Fig.2: Fix Small top support beam C1 and Big top frame A1 by using AA, BB. Fig.3: Fix Small top support beam C1 and Small top connector D1 by using DD, BB, CC. Fig.4: Screw the Pot hook E1 into Small top connector D1. Fig.5: Attach Beam connector C2 and Post A2 by using FF, BB. Fig.6: Attach Slanting bar connector F2 and Post A2 by using FF, BB. Fig.6-1: Insert Base cover D2 into Post A2, attach Base E2 and Post A2 by using AA, BB.
PAGE 6
Fig.9: Fix Small top roof panel 1 F1 and Small top roof panel 2 G1 onto small Top support beam C1 by using AA, BB. Fig.10: Fix Small top cover H1 onto Small top support beam C1 by using EE, BB, then fix Small top roof cover I1 and Small top connector D1 by using HH, BB. Fig.11: Attach Big roof top beam X6 (X5/W5/W6）to Top slanting bar A3 by using AA, BB. Fig.12: Attach Big roof top beam X5 to Top beam B3 by using AA, BB. (Repeat the procedure for X1-X6, W1-W6.) Fig.
PAGE 7
Fig.14-1: Connect Long side left roof panel C3 and Long side left roof panel E3 for a whole piece. Fig.14-2: Attach Long side left roof panel C3 and Long side left roof panel E3 onto the top frame by using AA, BB (Repeat the procedure for D3, F3, G3, H3, I3, J3, K3, L3, M3) Fig.15-1: Ins ert Big roof panel cover N3 into the hole of Small top support beam C1. Fig.15-2: Then attach Big roof panel cover N3 and Top slanting bar A 3 by using EE, BB, lock Big roof panel cover O3 onto Top beam B3. Fig.
PAGE 8
Backup Parts AA M6*15Bolt 4 PCS BB M6 Bigger flat washer 10 PCS CC M6*60 Bolt 2 PCS DD M6 Nut 3 PCS EE M6*35 Bolt 2 PCS FF M6*15 Bolt 4 PCS GG M6*70Bolt 2 PCS IMPORTANT : 1. Keep all children and pets away from assembly area. Children and pets should be supervised while gazebo is being assembled. 2. The assembled gaz ebo should be located at least 6 feet (2 m) from any obstruction such as a fence, garage, and house, overhanging branches, laundry lines or electrical wires. 3.
PAGE 9
be cleaned off regularly. Any damage caused by snow accumulation is not covered by the warranty. Limited Warranty: This limited warranty is extended to the original purc haser and applies to defects in materials and workmanship of your item provided the item is maintained with care and used only for personal, residential purposes. The item is warranted to be free from defects in material or workmanship for a period of one (1) year.
PAGE 10
GAZEBO NETTING AND CURTAIN ASSEMBLY INSTRUCTIONS Netting or Curatin is available separatley Plastic ring 104 PCS Fig.17: Hang Mosquito netting and curtain onto Long pipe 1 L2a (M2a, L2b, M2b) wit h Plastic ring , keep pipe lay on the inside of curtain.