Installation Guide
Hardware Pack 1
CC “7” stakeφ6*180 16 PCS
DD Plastic ring 52 PCS
Fig.5: Insert pole (E) into
center connector (I)
Fig.6: Insert installed
corner connector (M, L),
into screen (A)
Fig.4: Insert pole (E) into
corner connector (M,L)
Fig.7: Insert pole (G) into
center connector (I)
Fig.8: Insert pole (G) into long
side support pole1(C),insert
pole(F) with the same way, Then
slip over the big canopy(Q) on
the big top, do not fully spread.
Fig.9: Insert pole (H) into
center connector (J)







