Installation Guide

CC
M6*40 Bolt
8PCS
BB
M6 Washer
16 PCS
DD
M6 Nut
8 PCS
Hardware Pack 2
Fig.3: Attach the Middle Beam connecter (G) on the assembled panels by bolt (EE) and washer (BB).
Fig.4: Attach the Decoration cover (K) to the panel, fix them by bolt (AA) and washer (BB).
Fig.5: Fix the panels to the posts (D) by bolt (EE) and washer (BB).
Fig.1: Attach the stake cover (A) to the Posts (D) and lift the posts, connect the stake base (C) on the
posts by bolt (AA) and washer (BB).
Fig.2: Connect the short panels (E1&E2) by bolt (GG), washer (BB) and Nut (DD), connect the long
panels (F1&F2) in the same way.
Fig.6: Fix the Oblique Beam connecter (H) to the Posts (D) by bolt (AA) and washer (BB).
Fig.7: Fix the Cover Piece (I) to the Posts (D) by bolt (AA) and washer (BB).
Fig.8: Fix the Mosquito netting bar (J1&J2) to the panels (E1&E2&F1&F2) by bolt (AA) and washer (BB).