Easy Set Up AI L-GZ937PST-C
Parts List Stake Cover A 4 Roof Decoration B 1 Stake Base C 4 Post D 4 Short Panel 1 E1 2 Short Panel 2 E2 2 Long Panel 1 F1 2 Long Panel 2 F2 2 Middle Beam connecter G 4 H 4 I 4 J1 4 J2 4 Decoration cover K 4 Oblique Beam L1 4 Bottom Oblique Beam L2 4 Long Middle Beam M1 2 Bottom Long Middle Beam M2 2 Short Middle Beam N1 2 N2 2 O 1 Oblique Beam connecter Cover Piece Long Mosquito netting bar Short Mosquito netting bar Bottom Short Middle Beam Smal
Small roof Oblique Beam P 4 Big roof connecter Q 1 Hook R 1 Big canopy S 1 Small canopy T 1 Mosquito netting U 1 Hardware Pack 1 AA M6*15 Bolt 56 PCS BB M6 Washer 92 PCS DD M6 Nut 4 PCS EE M6*15 Bolt 24PCS GG M6*25 Bolt 8 PCS Z M6 Wrench 1 PC
Fig.1: Attach the stake cover (A) to the Posts (D) and lift the posts, connect the stake base (C) on the posts by bolt (AA) and washer (BB). Fig.2: Connect the short panels (E1&E2) by bolt (GG), washer (BB) and Nut (DD), connect the long panels (F1&F2) in the same way. Fig.3: Attach the Middle Beam connecter (G) on the assembled panels by bolt (EE) and washer (BB). Fig.4: Attach the Decoration cover (K) to the panel, fix them by bolt (AA) and washer (BB). Fig.
Fig.9: Insert the Oblique Beam (L1) into the Bottom Oblique Beam (L2). Fig.10: Insert the Oblique Beam (L1) into the big roof connecter (Q). Fig.11: Fix the Bottom Oblique Beam (L2) to the Oblique Beam connecter (H) by bolt (CC), washer (BB) and Nut (DD). Fig.12: Insert the Long Middle Beam (M1) into the Bottom Long Middle Beam (M2), insert the short middle beam (N1&N2) in the same way. Fig.
Hardware Pack 3 II Ring 52PCS FF Stake 16PCS Fig.17: Put the small canopy (T) on the assembled small roof. Fig.17-1: Attach the Roof Decoration (B) on the small roof. Fig.18: Attach the big canopy (S) to the big roof along the Bottom Oblique Beam (L2) Fig.19: Hang the mosquito netting (U) on the mosquito netting bar(J1&J2) by Ring (II). Fig.20: Fix the assembled gazebo to the lawn with stake (FF).
