Installation Guide

4 / 8
Hardware Pack 1
AA M6X20 Bolt 40 PCS
BB M6 Washer 80 PCS
CC M6X25 Bolt 32 PCS
DD M6 Nut 8 PCS
Z M6 Wrench 1 1 PCS
W1 M6 Wrench 2 2 PC
Fig.1: Put the stake cover(M) on the Post(A) and lift the stake cover，then assemble the Stake slate(L) to
the end of the Post(A) by using Bolt (AA)、Washer(BB).
Fig.2-1: Assemble the Long horizontal screen (B) and the Short horizontal screen (C) by using Bolt (CC)、
Washer(BB) and Nut(DD).
Fig.2-2: Attach the middle beam connector (D2) to the Long horizontal screen (B) and short horizontal
screen (C )by using Bolt (AA)、Washer(BB).