Use and Care Manual

5 / 8
Hardware Pack 2
BB
M6 Washer
16PCS
CC
M6X40 Bolt
8 PCS
DD
M6 Nut
8 PCS
Fig.6：Insert the Long beam of the large top (J) and Short beam of the large top (K) into the
Connector (L).
Fig.7：Insert the Slanting bar1 (E) into the Slanting bar2 (F).
Fig.8: Insert the slanting bar1 (E) into the Connector (L).
Fig.4：Assemble the Middle beam connector (I) to the Long screen of long side(C) by using Bolt(AA)
and Washer(BB).
Fig.5：Assemble the Long mosquito netting bar (O1) to the Short screen of long side (B) and Long
screen of long side (C) by using Bolt(AA) and Washer(BB).
Assemble the Short mosquito netting bar (O2) to the Screen of short side (D) by using Bolt (AA) and
Washer (BB).