Use and Care Manual

4 / 8
Hardware Pack 1
AA
M6X20 Bolt
58 PCS
BB
M6 Washer
58 PCS
DD
M6 Nut
2 PCS
W1
M6 Wrench
1 PC
Fig.1：Assemble the Short screen of long side(B), Screen of short side (D) to the Post 1(A1) by using
Bolt(AA) and Washer(BB).
Fig.2：Assemble the Short screen of long side (B) and Long screen of long side (C) to the Post (A2)
by using Bolt (AA) and Washer(BB) .
Fig.3：Assemble the two pieces of Screen of short side(D) by using Bolt (AA) and Washer(BB) and
Nut(DD) ，then attach the Middle beam connector (I) to the assembled short side Screen (D) by using
Bolt(AA) and Washer(BB) .