Use and Care Manual

5 / 6
Fig.8: Put on the Small
canopy (M) on small top.
Hardware Pack
FF
Dia.6x180MM Stake
16 PCS
Fig.5: Insert Middle beam (F) into
Connector (D), then assemble the
Top hook (E) on the connector (D).
Fig.7: Insert Short oblique beam
(C) into Top connector (B).
Fig.6: Insert Middle beam (F) into
Beam (I). Put on the Big canopy
(L) and do not unfold first.
Fig.10: Insert the assembled
small dome into Long oblique
beam (G) by Short oblique beam
(C).
Fig.9: Insert Finial (A) into Top
connector (B).