Assembly Instructions Item# D-GZ209PST-H 1/6
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. For technical assistance on assembly or replacement parts. Please call Sunjoy Industries at 1(866) 578-6569 from 8:00 am EST to 8:00 pm PST. WARNING: 1.When installing and assembling your gazebo, it is recommended that 2 or more adults are involved. 2.This product is intended for outdoor use only and should be placed on flat, horizontal ground. 3.
Parts List Description Part Quantity Finial A 1 Top connector B 1 Short oblique beam C 4 Connector D 1 Top Hook E 1 Middle beam F 4 Long oblique beam G 4 Oblique beam H 4 Beam I 4 Shelf J 4 Screen K 4 Big canopy L 1 Small canopy M 1 Image 3/6
Fig.1: Insert Beam (I) into Screen (K). Fig.2: Insert Long oblique beam Fig.3: Insert Long oblique beam Fig.4: Insert Oblique beam (H) (G) into Oblique beam (H). (G) into the Connect tube (D). 4/6 into Screen (K).
Fig.5: Insert Middle beam (F) into Fig.6: Insert Middle beam (F) into Fig.7: Insert Short oblique beam Connector (D), then assemble the Beam (I). Put on the Big canopy (C) into Top connector (B). Top hook (E) on the connector (D). (L) and do not unfold first. Fig.8: Put on the Small canopy (M) on small top. Fig.9: Insert Finial (A) into Top Fig.10: Insert the assembled small dome into Long oblique connector (B). beam (G) by Short oblique beam (C). Hardware Pack FF Dia.
Fig.11: Expand Big canopy (L), secure it to Fig.12: Put Shelf (J) on Fig.13: Secure the gazebo Screen (K). to the ground by using the Stakes (FF). the four corners of the oblique beam and the middle beam. CARE AND MAINTENANCE This gazebo is intended for decorative and sunshade purposes only, and is not designed to withstand hard weather, including high winds, rain, and snow. In order to avoid damages, remove accumulated water on the roof immediately, or disassemble the gazebo.
